Alvarion BreezeMAX PRO-S CPE, Product Manual

Page: 119 / 162

Radio Parameters Menu
BreezeMAX CPEs Product Manual 97
For a bandwidth of 5 MHz, the range is from 125 KHz to 5000 KHz, in steps of 125
KHz. The default is 875 KHz.
The Intermediate Scanning Steps include 8 Steps that define the intermediate
scanning steps as described above. The default is Enable for all eight steps.
The highest step defined by the Intermediate Scanning Steps cannot be higher
than the Scanning Main Step.
4.7.2.6 Discrete Scanning Frequencies
The Discrete Scanning Frequencies menu enables viewing and editing the list of
discrete frequencies that will be included in the Frequency Scanning Table. The
Discrete Scanning Frequencies menu includes the following options:
„
Show List of Discrete Frequencies : Select this option to view the current list
of discrete frequencies (if any)
„
Update List of Discrete Frequencies : Enter a list of up to 10 discrete
frequencies, separated by commas (no space). This list will replace the current
list of discrete frequencies.
„
Add One Discrete Frequency : Enter one frequency to be added to the current
list of discrete frequencies.
„
Delete One Discrete Frequency : Enter one frequency to be removed from the
current list of discrete frequencies.
„
Delete All Discrete Frequencies
4.7.2.7 Update Scanning Table
Select this option to update the frequency scanning table in run time (without
resetting the unit).
4.7.2.8 Clear Best AU Table
Select this option to clear the current Best AU Table. Typically this should be done
prior to initiating a full scanning process (see below).
4.7.2.9 Force Full Scanning
Select this option to initiate a full scanning process.