Alva GH310S Assembly & Operating Instructions Download Page 2

IMPORTANT SAFETY INFORMATION

As with all gas appliances, misuse of this appliance or failure to fully follow these instructions 

• 

THIS UNIT MUST BE THOROUGHLY CHECKED BEFORE USE.

• 

• 

DO NOT use this heater if you do not clearly understand the instructions and/or how to operate the 

controls. 

• 

Phone the customer care line at 086 100 ALVA (2582) for assistance. 

• 

by opening a door or window in the same room.

• 

DO NOT operate this heater in a bedroom, caravan, boat or any area less than 80 cubic meters            

(roughly 5 x 5 metres).

• 

DO NOT leave the heater unattended while in use.

• 

Ensure that the gas supply is turned OFF after use and while the heater is unattended.

• 

DO NOT move the heater while in use.

• 

DO NOT place objects on or against the heater.

• 

DO NOT attempt to use the heater as a stove.

• 

TEST’.

• 

NEVER use this heater with a cylinder other than the size recommended

• 

DO NOT touch the dress guard (front wire grill), as it gets very hot, while in use or after it has been 

be removed or changed.

• 

DO NOT unscrew the regulator while the heater is on or if the cylinder valve is open.

• 

DO NOT use a heater you suspect is faulty.

• 

sure to close the cylinder valve.

• 

The guarantee for the heater will be rendered void if the heater is serviced or repaired by any one other 

than an Alva appointed technician.

• 

fault free.

• 

The operator is responsible for the safety of all third parties while the heater is in use.

• 

DO NOT place the heater near walls, curtains or furniture while in use. The heater should always face the 

centre of the room, as indicated in Diagram A.

Diagram A

The recommended positioning of a gas heater in any living environment. 

Always have a clearance of at least 500mm on the sides and back and ±1000mm (1m) in front of it.

500m

m

500m

m

500m

m

1m

1m

1m

TECHNICAL DATA

Model

ALVA GH310S

Type of gas

LPG

Operating pressure

2.8kPa

Injector size

0.59

Gas Consumption

Position 3 (3 panels)

Position 2 (2 panels)

Position 1 (1 panel)

265gr/hr

175gr/hr

90gr/hr

Heat output

4.2kW

SANS 1539 (appliance), SANS 1237 (regulator) and SANS 1156 (hose).

           

FEATURES

Positive 

Oxygen Depletion Sensor (ODS)

200 parts per million.

Flame Failure Safety Device

5 Castor wheels

Extra stability and manoeuvrability.

ABOUT ALVA

11

Alva quality products are manufactured for and distributed by:

Alva Marketing (Pty) Ltd

5 Beach Road

Woodstock

Cape Town
Tel: 086 100 ALVA (2582) or 021 442 1540

E-mail: [email protected]

w

     @StingrayGroupSA

     www.facebook.com/AlvaGas

ww.alva.co.za

      

Summary of Contents for GH310S








Reviews: