ALUTHERM
|
Boilers 17
ALUTERM A 170 - 300
|
Installation, user and service manual
|
instructions for user
Heating
Alutherm A 170 - 300
5.4
Installer (technician) menu
If the button marked “4” (page 21) is pressed the screen as
given in the figure below will appear.
Once the menu is accessed by entering the code the
following options will be shown
1. ADVANCED CH SETTINGS
2. ADVANCED DHW SETTINGS
3. SYSTEM SETTINGS
4. DIAGNOSTICS
5. USER SETTINGS
6. CASCADE
7. RESTORE FACTORY SETTINGS
Pressing the up and down (R1-C2 and R3-C2) buttons will
highlight the desired parameter group. Pressing the OK
button (R2-C2) selects the chosen parameter group.
Pressing the up and down (R1-C2 and R3-C2) buttons
will highlight the desired parameter subgroup. Pressing
the OK button (R2-C2) selects the chosen parameter
subgroup.
Once a parameter subgroup option has been chosen it
is possible to change the parameters corresponding with
the selected subgroup.
Follow the instructions as per 5.3.1 to set or change a
parameter.
5.4.1
Parameters accessible by installer (technician)
An overview of the parameters accessible by the installer (technician) is given on the following pages.
