Alutech LG-500, Assembly And Operation Manual

Page: 70 / 82

ПРИВОД LG-500 | LG-500 DRIVE)
68
ADjUSTMENT
The pressed button when recording will control the remote in the first mode in the list ( tab. 8).
All other buttons of the remote control will be recorded automatically in the order specified in
the table 8 modes (refers to the settings in which several buttons are recorded).
MODE
SETTING
F1 F3 F6
1
SBS SBS OP
2 — LL STOP
3
— — CL
4 — — LL
1
Press and hold the button for about 5 secs to enter the
programming mode
2 After the appearance of ‘ P1 ’ inscription press the button
3
After the appearance of ‘ P2 ’ inscription press the button
4
Using the button or select the required setting of remote
control recording in the menu ‘ F1 … F6 ’
5 After the appearance of required setting press the button
6
‘ rc ’ is shown on the display, which means that the recording of remote controls
is expected
7
Press the selected control button 3 times on the remote
(the first control button)
8
The number which is to be assigned to the remote in the drive memory, will
automatically appear on the display (with the button
or the
number can be changed)
9 Press the button to confirm; after that a dot will appear on the display
10
In three seconds the automatic switch to the recording of the next remote con-
trol will take place. To exit the programming mode press the button
three times or wait for 15 seconds. (until automatic exit the setup menu)
Table 8
Table 9