OPERATING MANUAL. INDUSTRIAL SECTIONAL DOORS
7
PRODUCT CARE
•
to disengage the door closer on the wicket;
•
to use the doors when panels and components are dirty, which can lead doors
to operating badly and possibly failing;
•
to give the remote control to children;
•
to use sectional doors when obvious damage to pull ropes, springs, brackets and other
elements of construction, electric power cables and control devices is evident;
•
to use the doors when one or more component parts are out of order;
•
to repair the doors yourself or using unqualified persons.
It is only safe to enter and exit after the doors have stopped in the top edge position. At the
same time you have to be sure that there is no chance that a vehicle can touch the lower edge
of the door leaf or other construction elements of the door.
Attention!
It is prohibited to change the construction of the doors independently, including
installation of additional elements to the construction. It can lead to damage or fast
deterioration of the construction elements.
If and when violations and faults in your sectional door operation become evident, in particular,
in the case of any abnormal noise, smell or something similar, giving reason for concern, im-
mediately stop using the doors and contact the service department of the company, which
performed installation of the doors or another special service agency (company).
4.
PRODUCT CARE
In order to maintain the product in constant technically correct order and readiness to oper-
ate, it is necessary to keep all the door’s elements clean. Use rags and non-aggressive cleaning
liquids for cleaning.
When aggressive chemicals get on to the door’s surface, clean them away using a suitable
non-aggressive liquid.
Condensation and misting on the inner surfaces of glazing is acceptable.
For stable and durable sectional door operation it is necessary to meet the following requirements:
•
it is permitted to use only correctly adjusted doors;
•
there should be no hindrance and obstacles within the door’s walkway;
•
the rollers and hinges should be periodically lubricated using a consistent grease
(Lithol24 or similar);
Attention!
It is prohibited to lubricate the tracks using consistent greases.
•
to ensure smooth running of the door leaf during manual operation. When using an
electric motor do not accelerate or slow down the running of the door leaf;
•
do not leave the door slightly open or half-open for long periods;
•
before using the door during winter or after it being closed for long periods, it is
necessary to clean away snow, ice or dirt before operating;
•
to prevent sagging of the bottom end profile it is recommended not to step on or apply
downward pressure in some other way to the threshold of the wicket.
To clean door glazing it is recommended to wash off the dirt with clean water and then to wipe
the surface with a clean cloth or a soft bristle brush. It is allowed to use neutral non-abrasive
household detergents or specialized organic glass cleaners. Improper cleaning may result in
scratches on the surface and loss of transparency.
