The RE616 Wireless Siren
is an auditory warning device
that produces high volume warning sounds and low volume
notification sounds.
Features
• Siren cadence synchronized to panel
• 85 dBA minimum at 1m
• LEDs follow arming status and trouble conditions from
panel
• 5-year warranty
Sounds
a high volume warning for burglary, smoke and carbon
monoxide alarm conditions. Low volume notification sounds
are made for auxiliary alarm, status, and trouble conditions.
The siren will tamper when the cover is opened. The siren
will follow the panel’s alarm pattern and will chime when
the panel chimes. Status beeps and volume are adjustable
through the Installer application, or through the
interactive service provider’s web portal.
Enroll
by placing the panel into wireless enrollment mode
and then pulling the battery tab, or by inserting the battery.
The panel will beep to indicate when the siren has been
enrolled. The panel supports up to eight RE616 sirens
at one time. After enrolling the siren, take the panel out
of wireless enrollment mode. Close the battery cover.
The blue LED should be solid when the siren is enrolled
successfully.
• Once the siren is properly enrolled, test
functionality in a desired location.
To replace the batteries,
pull the battery cover off the front
of the siren to expose the battery compartment.
Optional screw mounting
can be done by securing the
siren to a surface
with the outlet plate mounting screw.
Use the panel installation guide to verify proper system setup.
RE616 Wireless Siren
™
Encrypted
IN
STALL
G
U I D E
I
