13
*48
7,7
Enables Contact ID
*47
Enter 1
ECP Bus Programming:
ONLY NEEDED IF USING ECP TO SEND SIGNALS AND NOT TIP/RING
Vista Programming for Communications - GSM Emulation:
Sec
BAT LTE as Sole
Communicator
BAT LTE in use
with another
Communication
Device for Failover
For Dual
Reporting
Code Summarization
*29
Enter 1
Enter 1
Enter 1
This enables GSM. The
BAT LTE Emulates a GSM.
*42
N/A
Enter Central
Station Receiver
Number
Enter Central
Station Receiver
Number
Secondary Phone Number
*43
Enter Account
Number
Enter Account
Number
Enter Account
Number
This is the central station
account number
*49
Enter 5
Please refer to
panel manual for
your particular
application
requirements
Please refer to
panel manual for
your particular
application
requirements
Dual Reporting; Setting
to 5 sends all reporting
to both primary and
secondary.
*54
Enter 0
Enter 2
Enter 0
The time it takes for the
communicator to switch
from primary to secondary.
*55
Enter 1
Enter 1
Enter 1 (BAT
LTE is Primary
Communicator)
Setting to 1 gives signal
priority to GSM (BAT LTE).
*65
Enter 1
Enter 1 till beep
Enter 1
Report Code for Openings.
*66
Enter 1, 1
Enter 1, 1 till beep`
Enter 1, 1
Report Code for Arming in
Away and Stay.
*193
Enter 1, 0
Enter 1, 0
Enter 1, 0
1 turns on/off keypad
address. 0 sets sound to
beep.
*48
7,7
Enables Contact ID
See Supported Panels section on pages 18-19 to verify your panel’s revision number and GSM emulation programming.
