12
Honeywell Vista Panel Wiring and Programming
Honeywell Vista Panel Programming
•
Recommended Keybus with Tip & Ring
•
(Keyswitch alternative programming see Page 17)
See supported panels section on page 18. Perform the TELCO programming if Tip & Ring is being used. If for whatever
reason you cannot use Tip & Ring to send signals then you can perform ecp bus programming. Otherwise, ALWAYS use
TELCO programming.
TELCO Programming:
Programming on Vista (BAT LTE as Sole Communicator):
Section
BAT LTE as Sole Communicator
Code Summarization
*41
Enter Phone Number
*43
Enter Account Number
*49
Enter 5
For All Communications
to BAT LTE
*54
Enter 0
No Delay Between Communicators
*55
Enter 0
Phone Line Communicates First
*65 & *66
Enter 1 till beep
If you want Opening/Closing
Reports
*193
Enter 1, 0
Enable to turn on Address 20
Vi
st
a K
ey
bu
s & T
ip & R
in
g W
iri
ng
