background image

29

 

Netti Rullestoler

      

language: 

English  

model: 

Netti I Comfort   

Version:

 November 2010

The companions should use the strength 

        in their legs carrying the chair, avoiding 
        unnecessary stress on the back.

8.6 Driving techniques
          - Down stairs -

Never use escalators, even if assisted by a    

       companion.

With assistance, forwards

• Check that the anti tip is turned up and

   that the push handles are fixed properly.

• Drive the wheelchair forward to the first 

   step of the stair.

• Angle the wheelchair backwards on the main 

   wheels. 

• Have a firm grip on the push handles, and    

   keep the balance on the main wheel taking 
    one step at the time

• Reaching the bottom of the stair, put the 

   front castors safely down on the floor.

 

T

urn the anti tip down.

  If two companions are present, one 

        person can assist lifting in the front of 
        the frame.

Do not lift the wheelchair holding onto            

       the foot supports.

Do not lift the wheelchair holding onto 

       the armrests.

With assistance, backwards.

• Check that the anti tip is turned up, and

   that the push handles are fixed properly.

• Pull the wheelchair backwards to the first  

   step of the stairs.

• Angle the wheelchair backwards on the  

   main wheels. 

• Pull the wheelchair slowly up the stair, one   

   step at the time keeping the balance on the 
   main wheel.

• Reaching the top of the stair, pull the 

   wheelchair backwards far enough to put 
   the front castors safely down on the floor.

  Turn the anti tip down.

  If two companions are present, one 

        person can assist lifting in the front of 
        the frame.

Do not lift the wheelchair holding onto  

        the foot supports.

Do not lift the wheelchair holding onto  

        the 
       arm supports.

Summary of Contents for Netti I Comfort







































Reviews: