background image

 

25

   

Language:

 

English  

Model

Netti 4U comfort|CE  

Version:

 November 2010

netti rullestoler

Language:

 

English  

Model:

 

Netti 4U comfort|CE 

 

Version:

 

November 2010      

   

Language:

 

English  

Model

Netti 4U comfort|CE  

Version:

 November 2010

Language:

 

English  

Model:

 

Netti 4U comfort|CE 

 

Version:

 

November 2010      

 7.6 Driving techniques
          - Down stairs -

  

Never use escalators, even if assisted

         by a companion.

 

   With assistance, forwards

    • Check that the anti tip is turned up 
    • Drive the wheelchair forward to the first 

       step of the stair.

    • Angle the wheelchair backwards on the 

        

       main wheels. 

    • Have a firm grip on the push bow, 

       and keep the balance on the main wheel 
       taking one step at the time

    • Reaching the bottom of the stair, put the   

       front castors safely down on the floor.

   

T

urn the anti tip downwards.

   

If two companions are present, one 

          person can assist lifting in the front              
          of the frame.

   

Do not lift the wheelchair holding   

           

          onto the foot supports.

   

Do not lift the wheelchair holding  

            

          onto the armrests.

   

7.7 Transfer

    Techniques for transfering to/from the
    wheelchair should be practiced well with
    the persons involved. Here, we give some
    important advices for preparation of the         
    chair:

With or without companion - sideways.
Before transfer:

• The wheelchair should be placed as close  

   as possible to the destination of the  
   transfer.

• Pull the wheelchair backwards 5-10 cm in

   order to make the front castors turn     
   forward.

• Lock the brakes.
• Remove foot support and arm support  

   on the side of the transfer.

With or without companion – forwards.
Before transfer:

• The wheelchair should be placed as close 

   as possible to the destination of the 
   transfer.

• Pull the wheelchair backwards 5-10 cm in

   order to make the front castors turn  
   forward.

• Lock the brakes.
• Tilt chair forward

Summary of Contents for Netti 4U comfort|CE



































Reviews: