17
Language:
English
Model
:
Netti 4U comfort|CE
Version:
November 2010
netti rullestoler
Language:
English
Model:
Netti 4U comfort|CE
Version:
November 2010
Language:
English
Model
:
Netti 4U comfort|CE
Version:
November 2010
Language:
English
Model:
Netti 4U comfort|CE
Version:
November 2010
Ill.6.9.5
Adjusting the angle of the footplate
• The foot plates can be adjusted in angle.
• Untighten the screw (B) and adjust the
foot plate to the required angle. Fix the
screw properly.
5 mm Allen key
Ill. 6.9.6
Locking and releasing the foot plates
• The foot plates come with a locking bolt
which makes the plates stronger
• To lock the foot plates pull the plastic
lock on the right foot plate and place the
lock over the bolt on the left foot plate.
• To release the foot plate pull the plastic
lock and lift the right foot plate up.
For outdoor use, there should be a
clearance of 4-5 cm between the
foot plate and the ground.
Ill. 6.9.7
While making the adjustment there
must be no load on the foot plates.
Removing the foot support:
• Pull the plastic lock on the foot plate
rearwards, so that the pin is released,
and the foot plate can be folded up.
• Raise the foot support a few degrees.
• Release the foot support by pulling it
slightly straight up.
• Swing the foot support outwards.
• Lift and remove the foot support. (ill.
6.9.8.).
Ill. 6.9.8
