5
Washing manual for manual wheelchairs
Version: 2022-05
GRADE 2
CLEANING PROCEDURE FOR WHEELCHAIR
ONE USER - CARE INSTITUTIONS
FREQUENCY: 2 TIMES A MONTH OR MORE DEPENDING ON USE AND NEED
1.
Remove back and seat cushion before washing. Please note the position of the cushions.
They must be installed at same position and height after cleaning when the same user
receives the chair back.
2.
Clean the wheelchair by sponge and mild detergent. Do not soak seat plate and Velcro back.
3.
Rinse wash using clean water to remove soap and degreaser.
4.
Use methylated spirit to remove any excess dirt or grease. Universal wipes can also be used.
5.
Let air dry. The frame may be polished with car wax to keep it shiny and protected.
6.
Remove dirt from axles and wheels with pliers or similar. Oil axles when required.
Disinfection:
Wipe the wheelchair with a soft rag wetted with methylated spirit or
Hydrogen-peroxide after washing.
Do not use jet water washing, it may damage seat plate bearings,
quick release, gas springs and labels.
CLEANING PROCEDURE FOR SEATING SYSTEM
see page 4
D
ue to hygienic reasons we recommend replacing all upholstery parts when a new user is
taking over the wheelchair.
Always follow the cleaning instruction label on cushions and covers. The table on page 4
gives an overview over the most used Netti cushions.
Use washing bag for the covers - the Velcro may cause extra wearing during washing.
“Male” part of the Velcro can be cleaned with a steel file brush.
