11
Washing manual for manual wheelchairs
Version: 2022-05
• SEATING UNIT:
Check the seating plate for breakage or cracks and
missing screws. Clean the seat cushion in accord-
ance with cleaning instructions on the cushion label
or replace. See cleaning procedure for seating sys-
tem, Page 4).
• BACK AND TILT MECHANISM:
Check the gas springs for damage and replace if
necessary. Adjust and oil wires and cables and cable
transfers. Clean and oil the piston rod on the gas
spring.
• LEG SUPPORT:
Check and adjust wheel/handles, check that no
adjustment screws are damaged or missing. Tighten
loose screws/nuts and oil all moveable parts. Do
not oil the adjustment bar in the mechanical lock.
Check the mechanical lock on the angle adjustable
leg supports and if necessary replace the lock cone.
Remove and check the fit of the leg supports to the
frame. If necessary replace the leg support brackets.
• PARKING BRAKES:
Check that all screws are in place and tight. If parts
are loose or missing, replace the complete brake
for security reasons. Adjust the brakes blocking the
wheels when activated using reasonable force.
Drum brakes are cleaned and adjusted locking the
wheels by full handle pull.
• ANTI TIPS:
Check the engagement and disengagement of the
anti tip tubes in the up and down positions.
Adjust the anti tip tubes in relation to the main
wheels, (see User Manual for correct adjustment).
• GENERAL INFORMATION:
Use Alu Rehab AS original parts only. Use light
bicycle oil on moveable parts and bearings.
Use HHS Lube (Wurth) on Gas Springs.
Recommended glue:
Loctite 2701 Thread Lock - full lock.
Loctite 243 Thread Lock - part lock.
Silver colour code: RAL 9007
Graphite grey colour code: RAL 7024
Black code colour: RAL 9005
Always have the User Manual available.
Piston rod
Brake handle
Brake handle
Brake shoe
Clamp
Brake shoe
Clamp
Profile
tube
Lock
pin
Spring
Netti 4U / CED
Plastic
holder
Lock
pin
Spring
Lock
washer
Netti 4U / CED
Spring
Plastic
clamp
Plastic
holder
Lock
washer
Plastic
wheel
Anti-tip all other wheelchairs
