background image

Step 4 :

 Remove poles, top first, then 

bottom.

Step 5 : 

Put poles back into bag and 

place inside tent.

Step 6 : 

Remove ladder from tent.

Step 7 : 

Put ladder into bag.

Step 8 : 

Place ladder inside tent. 

Be careful to not place ladder over 

the front lip of the tent as this can 

cause damage when closing the lid 

of the tent.

Step 9 : 

Lift compression elastic to 

middle of canvas. 

  

Step 10 : 

Place pull-down strap 

between elastic and canvas.

  

Step 11 :

 To close lid, pull strap 

downwards. This may be done using 

body weight rather than arm 

strength. 

 

Step 12 :

 Grab handle on roof when 

it comes into reach, and use it to pull 

the lid closed. Make sure the canvas 

is tucked in on both sides before 

closing. Also, make sure at least one 

window is open when closing tent or 

the trapped air makes closing very 

difficult.

Step 13 :

 

Secure lid by fastening 

both catches.

Step 1 :

 Retrieve ladder bag with 

pole bag inside.

Step 2 :

 Remove pole bag.

Step 3 : 

Even out bedding.

CLOSING 

EXPEDITION TENT

WWW.ALU-CAB.COM

Enquiries: 

[email protected]

Tel: +27 21 703 3028

For an operating video, visit our website (

www.alu-cab.com

). 

If you have any other queries, please feel free to contact us by email on 

[email protected]

Summary of Contents for EXPEDITION TENT

Page 1: ... Remove ladder from bag Step 9 Slot ladder onto catch and secure Note additional ladder brackets can be specified or ordered and installed on the sides for side entry Step 11 The light switch is located on the side of the frame RHS Move the mattress slighly and you will notice the switch together with the USB ports Step 10 Place pole bag into ladder bag and store in secure place V 06_16 page 1 EXPE...

Page 2: ... body weight rather than arm strength Step 12 Grab handle on roof when it comes into reach and use it to pull the lid closed Make sure the canvas is tucked in on both sides before closing Also make sure at least one window is open when closing tent or the trapped air makes closing very difficult Step 13 Secure lid by fastening both catches Step 1 Retrieve ladder bag with pole bag inside Step 2 Remo...

Page 3: ... carry a maximum weight of 50 kg With this added weight it requires more strength when opening the tent as gas lifts only assist The roof panels themselves are not designed to carry weight and will dent if you place items onto them If your tent is equipped with an electrical kit lights power points make sure these are turned off and unplugged during transit storage STORAGE INSTRUCTIONS AVOID closi...

Page 4: ...ES GEN 3 TENT SIDE RAIN ENTRANCE COVER 270 SHADOW AWNING SHADOW AWNING SIDE WALL KIT Have a look at some additonal tent accessories to get FULLY EQUIPPED THE ALU CAB SHOWER CUBE LOAD BARS LADDER EXTENSION WWW ALU CAB COM Enquiries queries alu cab co za Tel 27 21 703 3028 ...

Reviews: