Hardware Operations
1230B0049401
2-8
Place the PnP cap onto the load plate.
Figure 2-10 Placing on the PnP Cap
2.4.4
To install the processor
Reverse the steps above to install the processor. However, when inserting the processor into
the socket, make sure that the golden corner on the processor is pointed toward the socket as
picture shows:
Figure 2-11 Pointing the Golden Corner toward the Socket
When the processor is in place, press it firmly on the socket while you push
down the socket lever to secure the processor. The lever clicks on the socket
indicating that it is locked.
The processor fits only in one orientation. Do not force the processor into the
socket to avoid bending the pins and damaging the processor. If the processor
does not fit completely, check its orientation or check for bent pins.