ALTUS MLB 2410 User Manual Download Page 20

Page: 20 / 74

Introduction

1230B0049401

1-3

Quad Gigabit Ethernet RJ45 ports (For 2U)

Network controllers embedded in nVIDIA MCP55Pro (For 1U)

Or network controllers embedded in nVIDIA MCP55Pro and nVIDIA

IO55 (For 2U)

10/100/1000Mbps

Management NIC: dedicate 10/100Mbps integrated in AMI MG9091

Supports jumbo frame, RSS, check sum offload, failover and

teaming

Onboard VGA

ATI RN 50

16MB display RAM

PCI 32bit/33MHz interface

Integrated Super I/O

Winbond W83627HG controller

Supports one fast UART 16550 serial port, one PS/2 keyboard port,

and one PS/2 mouse port

BMC Daughter Card

Hitachi H8S2167

Or AMI MG9091

Expansion Slot

Two expansion slots support:

Riser card for 1U Chassis with one slot.

One PCI-X 64bit/100MHz or one PCI-E x8 (x16 socket)

One PCI-E x4 (x8 socket)

Riser card for 2U Chassis with three slots.

Two PCI-E x8 (x8 socket) and one PCI-X 64bit/100MHz

Two PCI-E x8 (x8 socket) and one PCI-E x4 (x8 socket)

Daughter Card

See Appendix A in the Chassis User Manual

Expansion slot refers to the slot on the riser card. For more information, please see

Chassis User Manual.

Summary of Contents for MLB 2410











































































Search results

Summary of Contents for MLB 2410

Reviews:

ALTUS MLB 2410, User Manual, Page: 20 / 74

Search results

Summary of Contents for MLB 2410

Reviews: