Possible problems and solutions
1. Please Note: When using the Altura Photo
Flashes as slave flashes outside, try to keep the
wireless trigger out of direct contact with
sunlight.
2. Always consider weather conditions when
shooting outside, as some environments may
damage your camera and flash unit if not
properly protected.
3. If you are experiencing overexposure or
underexposure in your pictures, please verify
your shutter speed, aperture, and ISO on both
your camera and Altura Photo Flash unit.
4. If you are experiencing vignetting or partial
illumination, please check that your Altura Photo
Flash’s focal length is at an adequate setting
compared to your camera lens’ current focal
length.
5. If you are experiencing abnormalities with your
Altura Photo Flash, please verify that your
batteries are all new and of the same brand. If
the problem persists, make sure the flash unit is
properly making contact with your camera’s hot
shoe insert.
