ALTUNA
AB32
33
EN
EXCEPTIONS AND TREATING METHODS
1. When non-cutting material is put into the notch accidentally,immediately release the trigger
and the moving blade will automatically return to the open state.
2. When the pruning branch is too hard, the trigger should be released in time and then the
moving blade will automatically return to the open state.
3. If the battery can’t be charged properly, first check whether the battery charger is the one
attached to the product. Then, ensure the charging voltage must be the same with that on
the nameplate.
4. If any electrical or mechanical fault occurs, please turn off the switch immediately.
5. Failure to operate in compliance with the instructions may lead to liquid eruption from the
battery. Please do not touch the liquid. In case of accidental contact, please rinse it
immediately with water. If the liquid splashes into the eye, after rinsing with water, please go
to the hospital, for the liquid ejected from the battery may cause irritation or burns.
AFTER-SALES SERVICES
|
In case of any problem in use, please contact us in time (see the last page for the contact de-
tails) and our professional staff will address them for you. Replacement any damaged part with
the exactly same one by our qualified maintenance staff can ensure the safety performance of
the electric pruning shears.
DISCLAIMER
ALTUNA
reserves the right to make technical improvements to the product described he-
rein. Please understand if there is any change. If there are discrepancies between the graphic
images and the texts, and the real objects herein, the latter shall apply.
Barrio Zubillaga, 58 20560
OÑATI ( Gipuzkoa )
+34 943 780 851
|
ESPAÑA / SPAIN
www.altuna.es
