Trove1 Mercury Kits Installation Guide
- 3 -
A
B
C
D
D
C
B
A
Altronix - eFlow4NB
Flying
Leads
– DC +
– BAT +
+ IN - +OUT-
ON-5V
OFF-12V
Altronix - VR6
TRG
TRIGGER
INPUT
ACM4
ACCESS POWER
CONTROLLER
LED1
LED2
LED3
LED4
MAIN
OUTPUT 1
NC C NO COM NC C NO COM
NC C NO COM NC C NO COM
OUTPUT 2
OUTPUT 3
IN GND
1
IN GND
2
IN GND
3
IN GND
4
OUTPUT 4
--
+
CONTROL
--
+
POWER
+INP-
T +RET
-
INTERF
ACE
NO C NC
FACP
Altronix - ACM4(CB)
T1MK1F4 and T1MK1F4D: Configuration of Mercury Boards:
1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller
(Fig. 2, pg. 3)
.
2. Position access controller module over corresponding spacers and depress onto snap on spacers
(Fig. 2a, pg. 3)
.
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
Mercury Access Controller
Pem Mounting
EP1502, LP1502, MR52, MR16IN, MR16OUT
A
EP1501, LP1501, MR51e, MR62e
B
MR50
C
EP2500, LP2500, MUX8
D
Fig. 2
Snap On
Spacer
Mercury Board
Backplane
Pem
Fig. 2a
