- 2 -
Tempo2 Installation Guide
Overview:
Altronix Tempo2 Digital Test / Trigger Mode Timer is suitable for many applications that require a timed operation.
e.g. delayed egress with a programmable 1-60 second door release after delay expires, door prop alarm, door
annunciator, alarm swinger eliminator, etc. Digital display facilitates ease of programming and indicates time
remaining before relay activation. Daily/Weekly test mode can be used to trigger digital communicators or radio
transmitters and provide Central Stations with an alarm test signal.
Specifications:
• Input 12 or 24 Volts AC or DC operation.
• Triggers via dry contact closure.
• Output dry Form “C” contacts are 2A @ 120VAC/28VDC.
• LCD display facilitates programming and indicates countdown status.
• Current draw: stand-by 15mA, relay energized 30mA.
• Dual function: test timer/one shot.
• EE Prom memory protects against loss of programming due to power failure.
• Board dimensions (L x W x H approximate): 3” x 2.5” x 0.75” (76.2mm x 63.5mm x 19.1mm).
One-Shot Features
(trigger activated)
:
• Programmable relay activation at the start or end of the timing cycle.
a. Delayed Pulse Mode:
- 1 to 60 sec. programmable pulse at the end of timing cycle.
b. Delay Mode:
- Relay can be programmed to energize or de-energize during timing cycle
(Digitally adjust from 1 sec. - 24 hours).
Dry
relay
output
Advance
C
NC
NO
POWER
12-24
VDC/VAC
Dry
Trigger
IN1
Confirm
