Altronix PT2724, Installation Manual

Page: 4 / 8

- 4 - PT2724
Push Button Layout:
Push Button Description Table:
Push Button Function/Description
SET Scrolling keys for programming. Escaping out of existing programming.
ENTER
Accepts selections made to programming.
UP Scrolls through selections.
DOWN Scrolls through selections.
UP
and
DOWN
keys can be used to select data entries.
After scrolling to the correct entry, depress
ENTER
to accept.
SW2 DIP Switch Selects tandem or individual relay operation.
SW3 Slide Switch Selects channel to be programmed.
Programming Instructions:
A. Setting Clock/Calendar:
Upon initial power up
will appear on display.
Depress
SET
. will appear on display.
Depress
ENTER
. will appear on display.
Enter the current date, day of week and time (military) by depressing
UP
and
DWN
to make the selection,
then depress
ENTER
to accept.
Next, select either DS (daylight savings mode) or ST (standard time mode) by depressing
SET
until
appears on display.
Depress
ENTER
to scroll until flashing cursor appears under DS (daylight savings mode) in display.
To change mode depress
UP
or
DWN
until ST (standard time mode) will appear in display.
Depress
ENTER
to accept correct selection.
Note: The flashing cursor denotes location of data entry selection to be made. If an entry was made in
error or requires changing, depress
SET
to backspace, make the correct selection and depress
ENTER
to
accept data and advance the cursor. To change or program clock/calendar simply repeat the steps above.
B. Setting and Adding Events:
Select channel A or B by moving slide switch SW3 to appropriate position.
Note: Channel cannot be changed in the middle of programming events. To change channels, you must
exit programming then change channel switch position then enter program mode again.
1. Setting Events
Depress
SET
until appears on display.
Depress
ENTER
. will appear on display.
Note: A01 indicates Channel A event 01. When cursor appears, you are able to scroll through events.
SET ENTER UP DWN
RLY OFF
SU 01:01
ENTER to
SET TIME
01/01/01
SU/01:01
ENTER to
SET BK
>
>
A01 OFF
SU 00:00
ENTER to
SET EVENT