background image

- 2 - 

Pace1PTM

   Installation  Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and 
with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or 
Recognized wire suitable for the application.
Pace1PTM is not intended to be connected to outside plant leads and should be installed indoors 
within the protected premises. Pace1PTM is intended for indoor use only.
1. Secure unit to desired mounting surface with a proper fastening device utilizing the case’s  
  mounting hole  (Fig. 2a, pg. 3). Unit should be mounted in the proximity of camera/device.
2. Connect structured cable from IP camera/device to RJ45 jack marked [PoE Out] (Fig. 2, pg. 3).
3. Connect Pace1PTM to the receiver (Pace1PRM, Pace4PRM, Pace8PRM or Pace16PRM):
 a. 

CAT5e or higher: Connect CAT5e or higher to the connector marked [RJ45 IN] 

  (Fig. 2, pg. 3).
    

UTP: For single UTP applications, jumpers (supplied) must be connected as follows:

      

1.  Remove the four (4) screws from the Pace1PTM cover. Do not discard hardware. 

      

2. Connect jumpers (supplied) to pins pairs [P5] and [P6] as shown (Figs. 1a & 1b, pg. 3). 

      

3. Replace cover and secure it with the four (4) screws.

      

4. Connect UTP to connector marked [UTP IN].

Caution: Once PoE connection is established between the receiver and Pace1PTM, disconnection 
from Pace1PTM will not disable the PoE output voltage on the receiver. Although the Pace1PTM 
can be reconnected, caution should be taken not to connect the CAT5e or single UTP wiring from 
the receiver to any non-PoE device.

Technical Specifications:

Parameter

Description

Connections

RJ45 for ethernet link or single pair UTP.

Input power 
requirements

PoE (15W) IEEE 802.3af compliant or 
PoE+ (30W) IEEE 802.3at compliant 
from Pace1PRM, Pace4PRM, Pace8PRM or Pace16PRM.

Indicators

Yellow (RJ45 connector): On - Link, Off - No Link, Blinking - Activity.
Green (RJ45 connector): On - 100Base-TX, Off - 10Base-T.
Green: PoE Active.

Environmental 
Conditions

Operating Ambient Temperature: UL60950-1:
  For 15W: --- 40ºF to 167ºF (--- 40ºC to 75ºC).
  For 25W: --- 40ºF to 158ºF (--- 40ºC to 70ºC).
  For 30W: -- 40ºF to 140ºF (--- 40ºC to 60ºC).
Relative humidity: 20 to 85%, non-condensing.
Storage Temperature: -- 40ºF to 167ºF (--- 40ºC to 75ºC).
Operating Altitude: -- 1000 to 6,561.679 ft. (-- 304.8 to 2000m).

Regulatory 
Compliance

UL/CUL Listed for Information Technology Equipment (UL 60950-1).

Weights (approx.) Product: 3.88 oz. (0.11 kg.), Shipping: 6.70 oz. (0.19 kg.)

Summary of Contents for Pace1PTM

Page 1: ...tion of legacy non PoE cameras devices Applications Retrofit digital IP cameras in an analog CCTV CAT5e or UTP installations Extend Network link distance in an industrial environment over 610m Works with Megapixel HD720 HD1080 and VGA SD cameras with proper headend equipment Mechanical Dimensions W x L x H approx 3 5 x 3 5 x 1 88 89mm x 88 89mm x 25 4mm Overview Pace1PTM is a long range Ethernet t...

Page 2: ... shown Figs 1a 1b pg 3 3 Replace cover and secure it with the four 4 screws 4 Connect UTP to connector marked UTP IN Caution Once PoE connection is established between the receiver and Pace1PTM disconnection from Pace1PTM will not disable the PoE output voltage on the receiver Although the Pace1PTM can be reconnected caution should be taken not to connect the CAT5e or single UTP wiring from the re...

Page 3: ... Power and PoE www altronix com IP UTP Receiver Passes PoE PoE Pace1PRM Receiver Structured Cable or Single UTP Legend PoE over CAT5e up to 500m max or Single UTP up to 152 4m max Powered Switch or MidSpan Structured Cable to Midspan Endspan Green LED indicates PoE Present from Midspan Endspan D g d M Structured Cable from Camera Device Green LED indicates PoE transmitted to Camera Device Green LE...

Page 4: ... PoE compliant 100m max Pace1PTM Pace1PTM Pace1PTM Pace1PTM PoE Camera PoE Camera PoE Camera PoE Camera PoE compliant 100m max PoE compliant 100m max PoE compliant 100m max PoE compliant 100m max Pace1PTM Pace1PTM Pace1PTM Pace1PTM Multiple PoE Cameras Connection Pace8PRM shown Pace4PRM and Pace16PRM are similar with four 4 and sixteen 16 channels respectively Fig 3 Maximum Length of Cable Type vs...

Reviews: