- 2 -
NetWay1 / NetWay1X
Note: Return to normal operation from shutdown can take about 4 seconds. Although there is
no output voltage to power PoE devices during shutdown, data signals may still be present on
the data pair lines of the CAT5e cable.
NetWay1:
Fig. 1
NetWay1X:
Fig. 2
NetWay1 Port Status and LED Flash Codes
Port Status
Flash Code
Flash Pattern
Non-Powered Device
0
Ω
< RPORT < 200
Ω
OFF
LED OFF
Port Open RPORT > 1M
Ω
OFF
LED OFF
Port On 25k
Ω
ON
LED ON
Low Signature Resistance
300
Ω
< RPORT < 15k
Ω
1 Flash
Z
l l l
Z
l l l
Z
l l l
High Signature Resistance
33K
Ω
< RPORT < 500k
Ω
2 Flashes
Z Z
l l
Z Z
l l
Z Z
l l
Port Overload Fault
5 Flashes
l l l l
Z Z
Z Z Z
l l l l
Structured
Cable from
Network
Switch
24VAC/
24VDC Input
12VAC to 24VAC or
5VDC to 24VDC Input
for PoE shutdown
Structured Cable from
IP Camera, IP Lock or IP device,
NetWay1512 or NetWayXT
Structured
Cable from
Network
Switch
24VAC/
24VDC Input
12VAC to 24VAC or
5VDC to 24VDC Input
for PoE shutdown
Structured Cable from
IP Camera, IP Lock or IP device,
NetWay1512 or NetWayXT
24VAC/VDC
Input
Power
Shutdown
IN
OUT
Port
Status
General Signaling
Equipment 92R2
I.T.E. 43KC
NetWay1
Single Port Injector (Midspan)
24VAC/VDC, 1.2A Input
48VDC 15.4W max. per IEEE 802.3af
www.altronix.com
Equipment 92R2
Access Control PoE Injector
Attack Class
I
Fig. 1a
Fig. 1b
Fig. 1c
Structured
Cable from
Network
Switch
24VAC/
24VDC Input
12VAC to 24VAC or
5VDC to 24VDC Input
for PoE shutdown
Structured Cable from
IP Camera, IP Lock or IP device
Power In LED
PoE LED
24VAC/VDC
Input
Power
Shutdown
IN
OUT
NetWay1X
Single Port Injector (Midspan)
Input:
24VAC/VDC, 1.5A
Output:
IEEE 802.3at (30W) and
IEEE 802.3af (15.4W)
compliant.
I.T.E. 43KC
Z109
Made in U.S.A.
www.altronix.com
Fig. 2a
Fig. 2b
