NetWay8V / NetWay16V Installation Guide
- 5 -
Installing a NetWayXT/NetWayXTX Repeater Module:
NetWayXT will work only with PoE devices. NetWayXTX will work with PoE/PoE+ devices.
1. Mount NetWayXT/NetWayXTX in desired location utilizing the mounting hole
(Fig. 4, pg. 5)
. Use a proper
fastener and/or wall anchor when securing NetWayXT/NetWayXTX to the wall.
2. Connect structured cable from port marked [OUT] on NetWay to port marked [IN] on the NetWayXT/NetWayXTX
(Fig. 4, pg. 5, Fig. 1a, pg. 3)
.
3. Connect structured cable from port marked [OUT] on NetWayXT/NetWayXTX to the PoE/PoE+ camera/edge
device or next NetWayXT/NetWayXTX repeater
(Fig. 4, pg. 5)
.
4. Port status LEDs will illuminate on NetWayXT/NetWayXTX indicating the port is operational
(refer to LED Definitions)
.
5. Power LED will illuminate indicating 12VDC output.
Port LED Definitions for NetWayXT Repeater:
Status
Green LED
Yellow LED
OFF
Indicates it is connected as 10Base-T or no link.
Indicates no link.
ON
Indicates it is connected as 100Base-TX.
Indicates a link.
Blinking
–
Indicates activity.
Port LED Definitions for NetWayXTX Repeater:
Status
PoE/PoE+ Output LED
PoE/PoE+ Input LED
Yellow LED
OFF
No PoE/PoE+ Output
No PoE/PoE+ Input
Indicates no link.
ON
Normal PoE/PoE+ Output
PoE/PoE+ Input
Indicates a link.
Blinking
–
–
Indicates activity.
Fig. 4 -
NetWayXT/NetWayXTX
Power
LED
Structured Cable
from NetWay8/16
Structured
Cable from
NetWay8/16
Structured Cable
to IP Camera/Edge Device
or next NetWayXT
PoE/PoE+
Output LED
Structured
Cable to
PoE/PoE+
Camera/Device or
next NetWayXTX
Port Status
LEDs
PoE/PoE+
Input
LED
NetWayXT
NetWayXTX
NetwayXT
Repeater
IN
OUT
Power
I.T.E. 43KC
www.altronix.com
Brooklyn, NY, U.S.A.
