eFlow102NV Series
- 9 -
Fig. 7 - eFlow102NXV configuration
Door
Wire Strap
(from
Enclosure
to Door)
Battery and AC
Supervision Circuit
CAUTION: Power supply board is 12VDC. Use only one (1) 12VDC stand-by battery.
Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing.
12AH Rechargeable batteries are the largest batteries that can fit in this enclosure.
An external battery enclosure must be used if using 40AH or 65AH batteries.
L
G
N
NC
C
NO
NC
C
NO
BAT FAIL
AC FAIL
---
DC
+
AC
AC1
DC
---
BA
T
+
– AUX +
TRIGGER EOL
SUPERVISED
5A 250V
RESET
GND NO
disable
enable
2 hr.
1 min.
AC DEL
AY
SHUTDOW
N
O
N
220VAC
power mains
Battery
connections
DC Output to devices*
(refer to Fig. 3a, 3b
for board configuration pg. 6)
PD8/PD8CB
DC Output to devices*
(refer to Fig. 3a, 3b
for board configuration pg. 6)
PD8/PD8CB
Optional Rechargeable
Stand-by Battery
Ground
Lug
* Outputs are non power-limited:
eFlow102NXV, eFlow102NX8V, eFlow102NX16V.
Outputs are power-limited: eFlow102NX8DV, eFlow102NX16DV.
Tamper Switch
(included)
To Access Control Panel or
UL Listed Reporting Device
Edge of
Enclosure
Enclosure
