background image

 

- 4 - 

AL125UL Series

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user 
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may 
be of sufficient magnitude to constitute an electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in the literature accompanying the 
appliance.

CAUTION: To reduce the risk of electric shock do not open 
enclosure. There are no user serviceable parts inside. Refer servicing 
to qualified service personnel.

Maintenance:

Unit should be tested at least once a year for the proper operation as follows:
Output Voltage Test: 

Under normal load conditions, the DC output voltage should be checked for proper 

 

voltage level (Power Supply Output Specifications Table, pg. 2).

Battery Test

Under normal load conditions check that the battery is fully charged, check specified 

 

voltage both at battery terminal and at the board terminals marked [+ BAT –] to 

 

ensure that there is no break in the battery connection wires.

Note: 

Maximum charging current under discharge is 400mA.

Note: 

Expected battery life is 5 years; however, it is recommended changing batteries in 

 

4 years or less if needed.

LED Diagnostics:

Red

Power Supply Status

ON

Normal function.

OFF

No DC output.

Slow Blink

Loss of AC.

Rapid Blink

Unit is triggered, awaiting reset. Fire alarm interface activated.

Summary of Contents for AL125UL Series









Reviews: