Altronix AL1012M220, Installation Manual

Page: 6 / 16

- 6 - M220 Series
Fig. 1 -
AL300M220 and AL400M220
- DC INPUT
+
POS (+) DC OUTPUT (ALARM
)
POS (+) DC OUTPUT (STANDBY) 6 7 8 9 10
1 2 3 4 5
TRIGGER
LED
POWER ON LED
NEG1 NEG2 NEG3 NEG4 NEG5
TRIGGER
NC C NO NC C NO
DRY OUTPUT POWER FAIL
MOM5_S
- INPUT +
L G
N
BA
T F
AIL NC C NO NC C NO AC
FA
IL
AC
+ BAT - + DC -
DC
BAT
SW1
OFF - 24V ON - 12V
ON
AC Delay
Battery Connections
DC Outputs to devices
220VAC power mains
Wire Strap
(from Enclosure
to Door)
Ground Lug
Optional Rechargeable
Stand-by Battery
Optional Rechargeable
Stand-by Battery
SW1
ON
1
OFF - 24V
ON - 12V
J1
AC Delay
Battery & AC
Supervision Circuit
NC C NO NC C NO
Keep power-limited wiring separate from non power-limited.
Use minimum 0.25" spacing.
CAUTION: Optional rechargeable stand-by batteries must match
the power supply output voltage setting.
CAUTION: De-energize unit prior to servicing. For continued protection
against risk of electric shock and fire hazard replace fuses with the same type
and rating (see marking on the board). Do not expose to rain or moisture.
Fig. 1a
Fig. 1b
Fig. 1c