1411 S. Roselle Rd. Schaumburg, IL 60193 Phone (847) 923-0002 Fax (847) 923-0004
Pump and back to 100º to turn on again)
Auto Enable:
Check to enable. Allows switch channel to automatically turn on and off other selected channels when
activated/deactivated.
Auto Switch Delay:
Time in seconds selected circuit is delayed from turning on if it is Auto Enabled from another channel.
Trig Enable:
External control to turn channel on or off. Requires wired connection to IGN (ignition), Trig 1 or Trig 2 terminals on module.
Save:
Saves changes and returns to previous Menu.
Lock Screen:
Master Code:
On the back of Module (not the touch screen)
there is a tag with the systems Master 4 digit program code and a
Temporary User Code. You can use the Master code to program
your User code. The Master code can always be used to reset
User code.
Reset User Code:
Use following sequence to program User
Code.
1) User code cannot be Master Code or 1234.
2) Key in Master Code and press ENTER
3) Use Back arrow to delete Master Code from window.
4) Key in number USER CODE XXXX and press ENTER
5) Press Enter Again
Now User Code is set.
Unlock Screen:
Key in User code and press ENTER
SLEEP:
Press Sleep to force sleep mode.
