21
PAGER SETUP
By pressing “9” you will the following will be displayed.
Enable Pagers
= 1
XMIT TIME
= 2
XMIT DATABASES = 3
Selecting “1” displays:
HOW MANY?_
Enter the number of pagers that are being used with the system.
Enter CAPCODE#1=
0996151
Enter the 7-digit pager capcode found on back of pager.
Select Baud Rate
1=1200 2=2400
1200
Select 1 or 2
Select the baud rate from back of pager. Do this for each pager you are
using.
Selecting “2” displays:
Enter Time (min)=
_
Enter time interval between pages. Minimum time is 2 minutes.
Selecting “3” displays:
Multipage Y=1,N=2
Enter Yes if you want to transmit the prediction for multiple databases.
Enter No if you only want to transmit the prediction for the database
selected during SETUP.
If you selected Yes for Multipage the following is displayed:
Page this DB?
DATA BASE # (shows name of data base)
Yes=1
Next=SCROLL
Done=ENTER
For every data base that you want to send predictions for press “1”
otherwise press “SCROLL” to go to the next Database or press
“ENTER” if you are done selecting databases.
