-34-
14.11 (continued)
The date is shown as month-day-year. The month, day and year can be edited separately.
With the selection arrow pointing to the month, use the
UNITS or
UNITS keys to increase
or decrease the month. Press ENTER to save the new month setting; the selection arrow will
point to the day. Use the same procedure to edit the day and the year.
TIME:
11:30 AM
DATE:
09-03-2000
14.12
To view or edit the communications setup, select “COMMUNICATIONS” from the menu and
press ENTER.
COMMUNICATIONS
NODE
1
PORT 1 ASCII
PORT 3 MODBUS
Use the NEXT key to select node, port 1 or port 3; then use the UP or DOWN arrow keys to
change the node number from 1 to 99 and port 1 and port 3 from ASCII to MODBUS. Press
ENTER to save selection.
14.13
To view Hourmeter and Servicemeter messages, select “HOURMETER FUNCTIONS” from
the main menu and press ENTER.
EDIT CONTROL VALUES
EDIT SAFETY SHUTDOWN
6
HOURMETER FUNCTIONS
VIEW FIRMWARE REV.
HOURMETER / SERVICE
MESSAGE NUMBER:
6
00
TOTAL HOURS: 0
RUN TIME HOURS
Use the UNITS and TENS keys to view the eleven, user-programmable service messages.
The F2 key can be used to reset the servicemeter timer for each individual message number.