9
Safety Instructions
GB
Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
WARNING
GENERAL SAFETY
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the machine, consult your supervisor or Altrad Belle.
This machine is designed to eliminate the possible risks arising from the use of it. However, risks
DO
reside, and these residual risks
are not clearly recognizable, and may cause personal injury or property damage, and possible death. If such unpredictable and
unrecognizable risks become apparent, the machine must be stopped immediately, and operator or his supervisor must take
appropriate measure to eliminate such risks. It is sometimes necessary that the manufacturer must be informed of such event for
future counter measuring.
ALWAYS
keep the Operator’s Manual and any other manuals that accompany this machine to hand. Immediately replace any
manuals that may have been lost or are now illegible.
PRE-START CHECKS
The following Pre-start-up inspection must be performed before the start of each work session or after every four hours of use,
ZKLFKHYHULV¿UVW3OHDVHUHIHUWRWKHVHUYLFHVHFWLRQIRUGHWDLOHGJXLGDQFH,IDQ\IDXOWLVGLVFRYHUHGWKHPDFKLQHPXVWQRWEHXVHG
XQWLOWKHIDXOWLVUHFWL¿HG
1. Thoroughly inspect the machine for signs of damage. Check components are present and secure.
2.
ENSURE
there is no debris or excessive dirt present on the machine.
&KHFNKRVHV¿OOHURSHQLQJVGUDLQSOXJVDQGDQ\RWKHUDUHDVIRUVLJQVRIOHDNDJH)L[DQ\OHDNVEHIRUHRSHUDWLQJ
4. Check the engine oil level and top up as necessary.
5. Check the engine fuel level and top up as necessary.
6. Check for fuel and oil leaks.
WORKSITES
•
ENSURE
the operator is familiar with the working surroundings. Worksites can be hazardous.
•
ALWAYS
keep the work area tidy and clear of any obstructions that may lead to accidents and/or injuries.
&RUGRQRႇWKHZRUNDUHDDQGNHHSPHPEHUVRIWKHSXEOLFDQGXQDXWKRUL]HGSHUVRQQHODWDVDIHGLVWDQFH
• This machine is heavy and must not be lifted single-handedly, either
GET HELP
or use suitable lifting equipment. A Wheel Kit
Transport option is also available for this machine (see our website
Altrad-Belle.com
OPERATING THE MACHINE
•
ENSURE
the operator has had adequate training prior to use, is familiar with all controls and knows how to safely switch the
machine
OFF
before it is switched
ON
LQFDVH\RXJHWLQWRGLႈFXOW\
• Suitable
PPE
MUST
be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe
FDSSHGIRRWZHDUZLWKDQWLVOLSVROHVIRUDGGHGSURWHFWLRQ:HDUFORWKLQJVXLWDEOHIRUWKHZRUN\RXDUHGRLQJDQG
DO NOT
wear
loose jewellery that could be caught in moving parts
•
ALWAYS
inform colleagues of what you will be doing and where you will be working.
•
DO NOT
RSHUDWHWKHPDFKLQHZKHQ\RXDUHLOOIHHOLQJWLUHGRUZKHQXQGHUWKHLQÀXHQFHRIGUXJVDOFRKRO
•
During use the engine becomes very hot, allow the engine to cool before touching it.
NEVER
leave the engine running and
unattended.
•
ENSURE
the operation handle has been securely tightened when changing from the ‘storage’ position to the ‘operation’ position.
•
NEVER
UHPRYHRUWDPSHUZLWKDQ\JXDUGV¿WWHGWKH\DUHWKHUHIRU\RXUSURWHFWLRQ$OZD\VFKHFNJXDUGVIRUFRQGLWLRQDQG
security, if any are damaged or missing,
DO NOT USE THE MACHINE
until the guard has been replaced or repaired.
•
When working on a gradient
ALWAYS
work up and down the slope, not across.
•
ALWAYS
SURFHHGZLWKFDXWLRQZKHQZRUNLQJDURXQGXWLOLWLHVJDVZDWHUSLSHVHOHFWULFDOOLQHV
•
ENSURE
extra care is taken when working near to banks or trenches where there is a danger of the material collapsing.
•
When working within trenches or pits
ALWAYS
pay attention to the side walls as the vibration from the machine could cause them
to
collapse.
•
Some vibration from the compaction operation is transmitted through the handle to the operator’s hands. The Altrad Belle Plate
&RPSDFWRUUDQJHKDVEHHQVSHFL¿FDOO\GHVLJQHGWRUHGXFHKDQGDUPYLEUDWLRQOHYHOV5HIHUWRWKH7HFKQLFDO'DWDVHFWLRQIRU
YLEUDWLRQOHYHOVDQGXVDJHWLPHVUHFRPPHQGHGPD[LPXPGDLO\H[SRVXUHWLPH
DO NOT
exceed the maximum usage times.
•
The compacting process will occasionally produce dust, which may be hazardous to your health. Always wear a mask that is suited
to the type of dust being produced.