
16
Troubleshooting Guide
GB
Problem
Cause
Remedy
Engine will not start.
No fuel.
Open fuel tap.
Fill fuel tank.
(QJLQHVZLWFKHGRႇ
Switch engine on.
Spark plug fouled.
Clean and reset plug gap.
Engine cold.
Close choke.
(QJLQHÀRRGHG
Honda, open choke, fully open throttle, pull
UHFRLOVWDUWHUXQWLOHQJLQH¿UHV
Engine still will not start.
Major Fault
Contact Agent or Altrad Belle.
Unit will not vibrate.
Engine speed too slow.
Set engine speed control to fast.
Drive belt tension loose.
Adjust belt tension.
$LU¿OWHUEORFNHG
&OHDQRUUHQHZDLU¿OWHU
Drive failure.
Contact Agent or Altrad Belle.
Vibrator failure.
Contact Agent or Altrad Belle.
Asphalt adhering to plate.
Lack of lubrication.
Use a water spray system.
%LWXPLQRXVVXUIDFHÀDNLQJODPLQDWLQJ
Over compaction.
Remove and relay.
Low travel speed (plate sinking).
Layer thickness too deep.
Remove some of the material.
Moisture content too high or too low.
Remove material and adjust.
Paving blocks damaged.
Plate in direct contact with material.
Use a paving pad.