Altos P10 F6, User Manual

Page: 24 / 35

20
1 System setup
(3) Engage the socket lever (near the Close icon) under the latch.
Engage the other socket lever (near the Open icon) under the
latch.
4 Install the heatsink fan assembly (see "Installing the heatsink"
on page 13 ) .
Replacing the hard disk
Follow these steps to replace your workstation’s hard disk:
1
Remove the workstation cover.
2 Detach all cables connected to the hard disk and pull the hard disk out.
3 Remove the drive rails that hold the hard disk to the drive frame
and detach the hard disk. Set the drive rails aside.
4
Insert the new hard disk into the frame and secure it with the
drive rails.
5
Reattach all cables to the new hard disk.
Note : Make sure that the other ends of the disk cables are securely
connected to their corresponding connectors on the mainboard.
6
Reinstall the disk frame to the housing.
7
Replace the workstation cover.