39
Mid Level Louvre Installation
11
To fit the louvre assembly in the mid level position place the louvre frame on top of the mid rail.
Make sure the glass rebate on the louvre frame lines up with the front face of the glazing bar then drill
pilot holes through the bottom rail of the louvre frame and secure to the mid rail with a 50mm CSK
screws (Diagram 94). Next, drill pilot holes through the glazing bar (diagram 95), diagram 96 shows
the ideal angle of the 80mm CSK screw. Again,
make sure the rebate for the glass lines up with the
front of the glazing bar before fixing. Leave the
pane out above the louvre until you are ready to
glaze.
Diagram 93
Dia. 94
Dia. 95
Diagram 95
Diagram 96
Diagram 94
X-ray
External
External
80mm
Scre
w
50mm Scre
w
Summary of Contents for Evolution octagonal
Page 1: ...1 04 19...
