GUTTERING
IF YOU HAVE A RAINWATER ADAPTOR KIT, PLEASE SEE SEPARATE
INSTRUCTIONS SUPPLIED WITH THE KIT.
Gutter Assembly and Fitting
Decide at which end the downpipes will be
located. Use a length of string to give a fall of
1
/
2
”/12mm over every 10’ / 3.04m.
Fix the downpipe brackets into position with
3
/
4
”/
19mm countersunk screws and slide the downpipe
into the brackets and fix loosely with the bolt & nut.
See fig 2.
Drill a 5mm fixing hole in the stop end outlet,
screw it into place with the downpipe connected.
Using a
3
/
4
”/ 19mm screw. See fig 4.
Fix the support brackets fig 3 and joint bracket/s
fig 5 as required for the length of greenhouse. Use
3
/
4
” (19mm) screws. Working from the downpipe
Tighten up the downpipe and fix the shoe at the
bottom. See fig 6.
Repeat the process on the other side.
fig 2
end fix the guttering into the brackets having
trimmed it to length if necessary with a fine saw.
The stop end should finish level with the gable end
of the greenhouse.
see
fig 1
fig 3
fig 3
&
5
see
fig 4
see
fig 2
see
fig 6
page 22
fig 4
fig 6
fig 5
Phone Summer Greenhouses free 7 days a week on 0800 9777 828 or visit www.SummerGreenhouses.com