18
CD302
3/8” (10 mm) chuck
Double-end driver bit
Torque regulation ring
Torque indicator scale
LED work light
Forward / reverse switch
Variable speed trigger with electric brake
Rubber-covered handle
18 volt lithium-ion rechargeable battery
Battery lock button
Charging stand
Switching adapter
Selector switch
ENGLISH
FUNCTIONAL DESCRIPTION
Figure 1 names the major components of the CD302
cordless drill/driver:
A
B
C
D
E
F
G
H
I
J
K
L
M
OPERATION
!
BATTERY PACK
IMPORTANT !
The battery is not fully charged. Before first use, the batte
ry pack requires 5-7
hours charge time to be fully charged. Subsequent rec
harging needs 3-5
hours for the battery to be fully charged.
Always switch to a fresh battery when tool performance begins to diminish.
Severe heat is most destructive to a battery; the more heat generated,
the faster the battery loses power. A battery that gets too hot can have a
shortened life.
Never over-discharge a battery by using the tool even after tool performance
has decreased. Do not attempt to discharge a tool’s battery by continuing to
pull on the tool trigger. When tool performance begins to diminish, stop the
tool and recharge the battery for optimal performance.
Batteries will reach full performance after about five charge/discharge cycles.
Always have drill rotation switch in neutral/lock position when removing or
inserting battery to avoid unintentional starting.
To remove battery pack from the tool, press the lock spring buttons (J in the
functional description) and pull out.
To insert, simply push pack in until lock spring clicks.
The battery charger consists of two parts:
1. a switching adapter/120 volt plug with a low-vo ltage lead
2. a charging stand
To charge, connnect the switching adapter/plug low-voltage lead to the charging
stand.
1.
2.
3.
4.
5.
6.
Fig.1
A
C
F
M
H
B
I
D
G
E
J
K
L
