8
Bridge Mode
With the AMPLIFIER MODE switch in BRIDGE position the two power amplifiers drive
together a single speaker cabinet with the sum of the power of the 2 amps. This is
commonly used to drive a single subwoofer and the main output on the front panel is used
to feed a pair of powered speakers.
EFFECTS LIST
#
PRESET
DESCRIPTION
PARAMETER
RANGE
1
VOCAL 1
Reverb, simulating a room with a small delay time.
Decay time
Pre-delay
0.8~1.1s
0~79ms
2 VOCAL
2
Reverb, simulating a small space with a small delay
time.
Decay time
Pre-delay
0.8~2.5s
0~79ms
3
LARGE HALL
Reverb, simulating a large acoustic space.
Decay time
Pre-delay
3.6~5.4s
23~55ms
4
SMALL HALL
Reverb, simulating the acoustics of a stage space.
Decay time
Pre-delay
1.0~2.9s
20~45ms
5
LARGE ROOM
Reverb, simulating a studio with many early reflections.
Decay time
Pre-delay
2.9~4.5s
23~55ms
6
SMALL ROOM
Reverb, simulating a bright studio room.
Decay time
Pre-delay
0.7~2.1s
20~45ms
7
PLATE
Simulates bright plate reverb.
Decay time
Pre-delay
0.6~6.1s
10ms
8 TAPE
REVERB
Simulates classic tape delay created by multiple
playback heads.
Decay time
Pre-delay
1.3~5.4
0~84ms
9 SPRING
REVERB
Simulates the lightly stretched sound of spring reverb
from analog transducers.
Decay time
Pre-delay
1.3~5.4s
0~84ms
10
MONO DELAY
Reproduces the signal after a small period of time.
Delay period
60~650ms
11 STEREO
DELAY
Reproduces the signal after a small period of time with a
slight difference between the two stereo channels.
Delay period
Feedback
210~400ms
37~73%
12 FLANGER
Classic stereo flanging effect, similar to a jet plane
taking off.
Rate 0.16~2.79Hz
13 CHORUS
Simulates the full, complex, watery sound of several
instruments playing the same thing.
Rate 0.5~5Hz
14
DELAY
Delay effect with room reverb.
Delay period
Reverse decay time
211~375ms
1.0~2.9s
15
FLANGER Stereo flanger effect with room reverb.
Flanger rate
Reverse decay time
0.16~2.52Hz
16
CHORUS Stereo chorus effect with room reverb.
Chorus rate
Reverse decay time
0.5~4.74Hz
1.5~2.9s
Main Speaker