3
INPUTS
1.
MONO INPUTS –
Connect a microphone or line level instrument to these inputs using
standard XLR or ¼” cable.
2.
MONO Channel INSERT
- Connect external sound processors such as compressor-limiter,
equalizers, etc. The Insert sockets can be used as direct-outs to feed the input of a 4-track
tape recorder.
3.
STEREO INPUTS
-
Stereo pair ¼” TRS connections
.
If you connect only to the left jack, the
input will operate in mono mode, (the mono signal will appear on both input channels).
CHANNEL CONTROLS
4.
PHANTOM PWR Switch
- A48 Volt Phantom Power only to the XLR MIC input.
When condenser microphones are not used, make sure that the Phantom Power is
disengaged.
5.
MONO IN GAIN
– Adjusts the signal for mic and line level sources.
6.
LEVEL LED –
Activates when there is an incoming signal.
7.
LOW CUT Button -
Activates a 75 Hz
low frequency filter to reduce hum noise or
microphone rumble.
8.
STEREO IN GAIN
–
Adjusts gain for the stereo line level channels.
1
LINE IN
INSERT
MIC 1
1
2
LINE IN 9
LINE IN 10
3
+48V (CH1-4)
4
1
LOW CUT
75HZ
18dB/OCT
0dB
-30dB
+15dB LINE
+44dB MIC
5
7
6
8