SPO
TLIGHT
Make all initial connections with all the equipment powered off, and ensure
that all the main volume controls are turned completely down.
1). Connect one side of the signal cable at your audio mixer into output
left /right (with Stereo-Jack or XLR) and the other side of the cable into
the line input (Stereo-Jack) of your active speaker cabinet.
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control of the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust
the main mix level control to manipulate the output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
2. SPEAKER CABINET QUICK START
Left
Main Mix
Output
Signal Cable
Mixer
Right
Main Mix
Output
Signal Cable
SR800SA
SR800SA
SR400P
SR400P
2
15" Compact subwoofer Active Speaker Cabinet
400W in AES Standard
42Hz-125Hz (-10dB)
122dB Continuous / 125dB Peak (Calculated)
15" Woofer, 3" High Power voice coil
HPF 80Hz under analog processor
LINE-COMBO/LINK-XLR-M, OUT SAT with SPK NL-4
Line 0dBu
Volume SUB / Volume SAT / Phase NORMAL-REVERSE / Power
ON with Green LED / Clip Limiter with Red LED / Ground Lift
120-240 Volt, in Switching Power mode.
18mm multi-layer Plywood , glued and reinforced, black-scratch
resistant paint, metal grille and rubber footer foot, four
optional wheel
One standard metal pole-mount , plus one metal handle.
591x 451 x 554mm
(23.27" x 17.76" x 21.81")
39.8 kg / 87.74 lbs
43.4 kg / 95.68 lbs
SR800SA
Power System
Frequency Response
Maximum SPL @ 1m
Transducer Low
Active Crossover
Input / Output
Input Level
External Control
Power Supply
Enclosure Construction
Mounting
Dimensions (HxWxD)
Net Weight
Shipping Weight
SPO
TLIGHT
7. TECHNICAL SPECIFICATION
SR400P
Power System
Frequency Response (-10dB)
Sensitivity (1w @ 1mt)
Impedance:
Maximum SPL @ 1m
Coverage (HXV)
Transducer Low
Transducer High
Horn Type
Passive Crossover
Input Connector
Enclosure Construction
Mounting / Suspension
Dimensions (HxWxD)
Net Weight
Shipping weight
12" 2-way Passive Speaker Cabinet
400W Continuous in AES Standard
47Hz-20kHz (-10dB)
94dB SPL
4
(nominal)
122dB Continuous / 125dB Peak (Calculated)
90 x 45 nominal
12" Woofer, 2.5" High Power voice coil
1" Driver with 1.4" voice coil, Titanium Diaphragm
Eliptical Waveguide
2kHz at 12dB/oct with Electronic Protection
INPUT / THRU with SPK NL-4
Trapezoidal shape, 15mm multi-layer Plywood , black-scratch
resistant paint, metal grille and footer foot.
One metal pole-mount , two metal handle
615 x 377.5 x 377.8mm
(24.21" x 14.86 x 14.87")
16.83 kg / 37.11 lbs
19.13 kg / 42.17 lbs
7
Speaker Cable
(14 AWG)
Speaker Cable
(14 AWG)
