background image

7. WARRANTY

11

1. WARRANTY REGISTRATION CARD

To obtain Warranty Service, the buyer should first fill out and return the enclosed

Warranty Registration Card within 10 days of the Purchase Date.
All the information presented in this Warranty Registration Card gives the
manufacturer a better understanding of the sales status, so as to provide a
more effective and efficient after-sales warranty service. Please fill out all the
information carefully and genuinely, miswriting or absence of this card will void
your warranty service.

2.1 In case of return for any warranty service, please make sure that the

product is well packed in its original shipping carton, and it can protect your
unit from any other extra damage.

2.2 Please provide a copy of your sales receipt or other proof of purchase with

the returned machine, and give detail information about your return address
and contact telephone number.

2.3 A brief description of the defect will be appreciated.
2.4 Please prepay all the costs involved in the return shipping, handling and

insurance.

3.1

warrants that this product will be free from any defects in materials

and/or workmanship for a period of 1 year from the purchase date if you
have completed the Warranty Registration Card in time.

3.2 The warranty service is only available to the original consumer, who purchased

this product directly from the retail dealer, and it can not be transferred.

3.3 During the warranty service,

may repair or replace this product at its

own option at no charge to you for parts or for labor in accordance with the
right side of this limited warranty.

3.4 This warranty does not apply to the damages to this product that occurred

as the following conditions:

Instead of operating in accordance with the user's manual thoroughly, any abuse
or misuse of this product.
Normal tear and wear.
The product has been altered or modified in any way.

Damage which may have been caused either directly or indirectly by another

product / force / etc.

Abnormal service or repairing by anyone other than the qualified personnel or
technician.

And in such cases, all the expenses will be charged to the buyer.
3.5 In no event shall

be liable for any incidental or consequential damages.

Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusion or limitation may not apply to
you.

3.6 This warranty gives you the specific rights, and these rights are compatible

with the state laws, you may also have other statutory rights that may vary
from state to state.

2. RETURN NOTICE

3. TERMS AND CONDITIONS

LTO

LTO

LTO

Summary of Contents for MS1















Reviews: