LTO
LTO
TM
Mounting the Unit
DYNAMATE has two fixing 'ears' at each side, allowing it to be firmly screwed to a suitable surface. It may be mounted
vertically or horizontally. Take care not to mount the unit where it may become wet or subject to damage from items
placed in the trunk area.
Signal Inputs/Outputs
The Left and Right Channel input and output terminals are standard phono type sockets. Connect the low-level pre-
amplifier output cables from your car radio/cassette player, CD/receiver or other source unit to the Input terminals of
DYNAMATE.
Connect suitable cables (not supplied) from the Output terminals of DYNAMATE to the corresponding input terminals of
your power amplifier.
Where to place DYNAMATE in the signal path
DYNAMATE should normally be placed in line after an equalizer (if you have one of these in your system) but before an
active crossover (if you have one of those in your system). In some circumstances you may wish to dedicate the DYNAMATE
processing to only certain channels/speakers (the front speakers, for example). In this case you could connect DYNAMATE
in line between the front channel outputs of the active crossover and the inputs of the power amplifier which powers the
front speakers.
Caution:
DYNAMATE must always be placed in line BEFORE the power amplifier stage.
Power, Ground and Remote Switch-On (REM) Terminals
Caution:
Before making any connections, you must stop power delivery from the battery to avoid accidental short-circuits.
The conventional way is to disconnect the Negative terminal of the battery but beware -
this action will disconnect power
from all electrical items in the vehicle, including
:
the audio source unit (which may require a code number to reactivate it - do you know the code?)
the security system (which may trigger and sound an alarm from its back-up battery - do you know how to override the
alarm system?)
memory modules (which may suffer memory loss if disconnected for too long).
If you have any doubts you should seek professional assistance first. Professional auto electricians will
Installation Instructions
