Alto aComp User Manual Download Page 21

20

 1. WARRANTY REGISTRATION CARD

To obtain Warranty Service, the buyer should first fill out and return the enclosed 
Warranty Registration Card within 10 days of the Purchase Date. 

All the information presented in this Warranty Registration Card gives the manu-
facturer a better understanding of the sales status, so as to purport a more effective 
and efficient after-sales warranty service.

Please fill out all the information carefully and genuinely, miswriting or absence 
of  this card will void any of your warranty service. 

2. RETURN NOTICE

2.1 In case of return for any warranty service, please make sure that the product is 

well packed in its original shipping carton, and it can protect your unit from any 
other extra damage.

2.2 Please provide a copy of your sales receipt or other proof of purchase with the

 returned machine, and give detail information about your return address and 

contact telephone number. 

2.3 A brief description of the defect will be appreciated. 

3. TERMS AND CONDITIONS

3.1 

 warrants that this product will be free from any defects in materials and/or 

LTO

workmanship for a period of 1 year from the purchase date if you have completed 
the Warranty Registration Card in time. 

3.3 During the warranty service, 

 may repair or replace this product at its own 

LTO

option at no charge to you for parts or for labor in accordance with the right side 
of this limited warranty.

3.4 This warranty does not apply to the damages to this product that occurred as the 

following conditions: 

Instead of operating in accordance with the user's manual thoroughly, any abuse 

or misuse of this product.

Normal tear and wear
The product has been altered or modified in any way .
Damage which may have been caused either directly or indirectly by another 

product / force / etc.

Abnormal service or repairing by anyone other than the qualified personnel or 

technician.

 And in such cases, all the expenses will be charged to the buyer.

3.2 The warranty service is only available to the original consumer, who purchased 

this product directly from the retail dealer, and it can not be transferred.

2.4 Please prepay all the costs involved in the return shipping, handling and insur-

ance.

7. Warranty 

Summary of Contents for aComp























Reviews: