5.1.2 Store & Naming PRESET
Use this menu to create new PRESETS, i.e. to save all the current system settings.
To save a PRESET:
Press
The
page appears, by means of which it s possible to edit the name of the
ENTER.
PRESET Naming
PRESET to be saved.
remains unvaried.
The name of the start PRESET (i.e. of the PRESET currently loaded) is proposed as default. The cursor takes up
position on the first of the twelve character spaces available.
At this point:
If you decide to accept and confirm the name suggested, press
ENTER.
If you want to abort
procedure (for example because you've chosen the wrong memory area) and
Naming
return to Store PRESET procedure, press
.
ESC
If you want to assign a new name to the PRESET you're storing:
- use the
and
keys to position the cursor on the required character
- use
to enter the alphanumeric value wanted
DIAL
- after finishing, press
ENTER.
12
S t o r e
2
U
2 x 2 W
P r e s e t
+ 2 M A X
S t o r e
3
U
O p e
P r e s e t
r a H a l l
1
S t o r e
1
C
N
P r e s e t
0
1
O
C A R D
P r e s
m
n
i
2
N a
e t
2 W + 2 M A X
Note:
If you're in one of the 128 memory areas reserved for the Card and you remove the Multimedia Memory Card
before pressing
nothing happens: the display remains unchanged and Store
procedure
ENTER,
PRESET
Note:
Factory PRESET #3
In the example,
, named "2x3W" has been loaded: Its system configuration is Input A
signal assigned to outputs 1, 3 and 5; Input B signal assigned to outputs 2, 4 and 6.
Loading a PRESET, a PRESET Change command is also automatically sent to the serial ports and can be used
to automatically load a PRESET with the same number to any other MAXIDRIVE3.4 units connected and enabled
(Refer to
menu
submenu
option).
UTILITY
- Comm. Setup
- PRESET Change RX
Use
to reach the memory area in which the PRESET is to be saved.
DIAL
Note:
Factory PRESET
Factory PRESETS
PRESET,
User PRESET
Card PRESET
User or
Card
In this procedure, the
areas aren't available, since the
can not be
permanently remember that it is possible to load a Factory
modified. Nevertheless save it in a
or
area, modify it as required and then store it again in the same
area.
Note:
PRESETS
Scrolling through the memory areas, the display shows the number, type and name of the
contained in them; scrolling through the 128 Card memory areas without the Multimedia
Memory Card,
a warning appears on the display:
