6
Power Switch
Set the power switch in the position "ON", then the microphone is turned on
and flashes once. Set the power switch in the position "OFF", then the
microphone is turned off and the BATT LED lights off slowly.
3.3 U-16P, Body Pack Transmitter
SPO
TLIGHT
3. CONTROL ELEMENTS
5
7
9
8
3
6
1
2 MINI 4P Connector
This connector is used to connect the unit with the clip microphones, for
example, HM-38 condenser microphone or LM-10 clip microphone.
Pin 1 GND
Pin 2 Phantom power supply for condenser microphone
Pin 3 For guitar, bass and keyboards
Pin 4 For dynamic or condenser microphone
Antenna
It is a flexible antenna. To get effective transmission, never cover the antenna with
hand, clothes, etc during the operation, and always position the transmitter nearby
the receiver.
5
Battery Compartment
This unit may be powered from one pair dry or rechargeable batteries, size AA
1.5 V.
3
Belt Clip
It is the detachable belt clip for easy carry during the live applications.
4
(1) (4) (3)
(2)
4
2
1 10
POWE
R
BATT.
LOW
ANT.
ON
OFF
