4
Power LED
This LED lights up when the receiver is powered on and vice versa.
AF Peak LED
This LED lights up when the signal reaches PEAK and you will get distortion.
RF LED
This LED lights up when antenna receives signals.
Note:
U-16R has two antennas. LED A lights up when antenna A receives
more signals than antenna B. LED B lights up when antenna B receives more
signals than antenna A.
2
3
4
SPO
TLIGHT
3. CONTROL ELEMENTS
Volume Control
It is used to adjust the volume of your U-16R.
Antennas
The antennas receive the signals from transmitter.
5
6
THE REAR PANEL
DC Input
You can connect the supplied AC Adapter to this socket.
Audio Output XLR
To connect a balanced cable with XLR connector (we forgot to tell you that
although your U-16 system is wireless, you still need to connect the receiver
to your Mixing Desk and to a wall plug!)
Squelch Control
It is used to adjust the squelch level by using an adjusting bar which is placed in
the microphone. The adjustable squelch range is 95.0~65.0 dB.
1
2
3
5
4
MODEL
SERIAL
DC IN
SQUELCH
BAL
AUDIO
OUTPUT
UNBAL
CH SEL
MAX
12-18V
0.3A
+
-
1
2
3
Audio Output Jack
To be used with an unbalanced cable and standard 1/4" mono jack.
4
Frequency Band Selector
Using a select bar, you can select the right frequency band you want.
5
