Alto-Shaam PLATINUM Series Installation Operation & Maintenance Download Page 2

Page: 2 / 39

Delivery .................................................................... 1
Unpacking ............................................................... 1
Safety Procedures and Precautions ........................ 2

Installation

Operating Instructions

User Safety Information .................................... 11
Start-Up Operation ........................................... 11
Capacity ............................................................ 11
Options & Accessories ..................................... 11
Pan/Shelf Positioning ....................................... 12
Electronic Control Operation and Features ...... 13
Cooking Guidelines .......................................... 14

Care and Cleaning

Service

Troubleshooting Guide ..................................... 17
ASC-2E Manual Control

Full Assembly ............................................... 18
Interior Assembly ........................................ 19
Control Assembly ......................................... 21

ASC-4E Manual Control

Full Assembly ............................................... 22
Interior Assembly  ........................................ 23
Control Assembly ......................................... 25
Door Package  .............................................. 26
Door Mechanism  ......................................... 27
Door Hardware  ............................................ 28

Wire Diagrams

Always refer to the wire diagram(s) included with
the unit for most current version.

Warranty

Transportation Damage and Claims .. Back Cover
Limited Warranty ............................... Back Cover

MN-28666 (

e v

. 3) 09/15 • ASC SERIES CONVECTION OVENS

Summary of Contents for PLATINUM Series








































Search results

Summary of Contents for PLATINUM Series

Reviews:

Related manuals for PLATINUM Series

Brands by name

Popular brands

Alto-Shaam PLATINUM Series, Installation Operation & Maintenance

Search results

Summary of Contents for PLATINUM Series

Reviews:

Related manuals for PLATINUM Series

Brands by name

Popular brands