Alto-Shaam Halo Heat 500-GD Installation Operation & Maintenance Download Page 17

All Alto-Shaam equipment 
is sold F.O.B. shipping
point, and when accepted
by the carrier, such
shipments become the
property of the consignee.

Should damage occur in shipment, it is a matter

between the carrier and the consignee.  In such cases, the
carrier is assumed to be responsible for the safe delivery
of the merchandise, unless negligence can be established
on the part of the shipper.

1.

Make an immediate inspection while the equipment
is still in the truck or immediately after it is moved to
the receiving area.  Do not wait until after the
material is moved to a storage area.

2.

Do not sign a delivery receipt or a freight bill until
you have made a proper count and inspection of all
merchandise received.

3.

Note all damage to packages directly on the carrier’s
delivery receipt.

4.

Make certain the driver signs this receipt.  If he
refuses to sign, make a notation of this refusal on 
the receipt.

5.

If the driver refuses to allow inspection, write the
following on the delivery receipt:  

Driver refuses to allow inspection of

containers for visible damage.

6.

Telephone the carrier’s office immediately upon
finding damage, and request an inspection.  Mail a
written confirmation of the time, date, and the
person called.

7.

Save any packages and packing material for further
inspection by the carrier.

8.

Promptly file a written claim with the carrier and
attach copies of all supporting paperwork.

We will continue our policy of assisting our

customers in collecting claims which have been properly
filed and actively pursued.  We cannot, however, file any
damage claims for you, assume the responsibility of any
claims, or accept deductions in payment for such claims.

Alto-Shaam, Inc. warrants to the original purchaser that any

original part that is found to be defective in material or workmanship
will, at Alto-Shaam's option, subject to provisions hereinafter stated,
be replaced with a new or rebuilt part.

The labor warranty remains in effect one (1) year from installation

or fifteen (15) months from the shipping date, whichever occurs first.
Alto-Shaam will bear normal labor charges performed during standard
business hours, and excluding overtime, holiday rates or any
additional fees.

The parts warranty remains in effect for one (1) year from

installation or fifteen (15) months from the shipping date, whichever
occurs first.

However, the heating element on Halo Heat

®

cook/hold ovens 

and the refrigeration compressor on Alto-Shaam Quickchillers

are

warranted for a period of five (5) years from installation.  The labor
warranty is the same as stated above; namely, for one (1) year from
installation or fifteen (15) months from the shipping date, whichever
occurs first.

THIS WARRANTY DOES NOT APPLY TO:

1. Calibration.

2. Replacement of light bulbs and/or the replacement of display 

case glass due to damage of any kind.

3. Equipment damage caused by accident, shipping, improper

installation or alteration.

4. Equipment used under conditions of abuse, misuse, carelessness 

or abnormal conditions including, but not limited to, equipment
subjected to harsh or inappropriate chemicals including, but not
limited to, compounds containing chloride or quaternary salts, poor
water quality, or equipment with missing or altered serial numbers.

5. Damage incurred as a direct result of poor water quality,

inadequate maintenance of steam generators and/or surfaces
affected by water quality.  Water quality and required maintenance
of steam generating equipment is the responsibility of the
owner/operator.

6. Damage caused by use of any cleaning agent other than 

Alto-Shaam's Combitherm

®

Cleaner including, but not limited to,

damage due to chlorine or other harmful chemicals.  Use of 
Alto-Shaam's Combitherm

®

Cleaner on Combitherm

®

ovens is

highly recommended.

7. Any losses or damage resulting from malfunction, including loss 

of product or consequential or incidental damages of any kind.

8. Equipment modified in any manner from original model,

substitution of parts other than factory authorized parts, 
removal of any parts including legs, or addition of any parts.

This warranty is exclusive and is in lieu of all other warranties,

expressed or implied, including the implied warranties of
merchantability and fitness for a particular purpose.  In no event 
shall Alto-Shaam be liable for loss of use, loss of revenue or profit, 
or loss of product, or for any indirect or consequential damages.  
No person except an officer of Alto-Shaam, Inc. is authorized to
modify this warranty or to incur on behalf of Alto-Shaam any other
obligation or liability in connection with Alto-Shaam equipment.

A LT O - S H A A M ,   I N C .    

T R A N S P O RTAT I O N  

D A M A G E   a n d   C L A I M S

®

RECORD THE MODEL AND SERIAL NUMBER OF THE APPLIANCE FOR EASY REFERENCE.  

ALWAYS REFER TO BOTH MODEL AND SERIAL NUMBER IN  ANY CONTACT WITH ALTO-SHAAM REGARDING THIS APPLIANCE.

Model: 

_______________________________________________

Date Installed: 

__________________________________________________________

Voltage: 

______________________________________________ 

Purchased From: _______________________________________________ 

Serial Number: 

_______________________________________  _______________________________________________________________________

W 1 6 4   N 9 2 2 1   W a t e r   S t r e e t  

P. O .   B o x   4 5 0  

M e n o m o n e e   F a l l s ,   W i s c o n s i n   5 3 0 5 2 - 0 4 5 0  

U . S . A .

PHONE:   262.251.3800  • 800.558-8744 

USA

/

CANADA

FAX:   262.251.7067 • 800.329.8744 

U

.

S

.

A

ONLY

WEBSITE:  www.alto-shaam.com

P R I N T E D I N U

.

S

.

A

.

L I M I T E D

WA R R A N T Y

Summary of Contents for Halo Heat 500-GD


















Reviews: