background image

MN-28953 (Rev 0) • 09/13 • AR-7H Hot Holding Rotisserie Companion Operation & Care Manual • 1

D E L I V E R Y

 

This Alto-Shaam appliance has been 

thoroughly tested and inspected to ensure only 
the highest quality unit is provided.  Upon 
receipt, check for any possible shipping damage 
and report it at once to the delivering carrier. 

 

See Transportation Damage and Claims section 
located in this manual.

 

This appliance, complete with unattached 

items and accessories, may have been delivered 
in one or more packages.  Check to ensure that all 
standard items and options have been received 
with each model as ordered.
 

Save all the information and instructions 

packed with the appliance.  Complete and return 
the warranty card to the factory as soon as 
possible to ensure prompt service in the event of a 
warranty parts and labor claim.  
 

This manual must be read and understood 

by all people using or installing the equipment 
model.  Contact the Alto-Shaam Tech Team Service 
Department if you have any questions concerning 
installation, operation, or maintenance.

NOTE:

  All claims for warranty must include the 

full model number and serial number of 
the unit.

U N P A C K I N G

1.  Carefully remove the 

appliance from the 
carton or crate.

 

NOTE:  

 Do not discard the 
carton and other 
packaging material 
until you have 
inspected the unit 
for hidden damage 
and tested it for 
proper operation.

2.  Read all instructions in this manual carefully 

before initiating the installation of this appliance.

 

DO NOT DISCARD THIS MANUAL.  
This manual is considered to be part of the 
appliance and is to be provided to the owner 
or manager of the business or to the person 
responsible for training operators.  

Additional 

manuals are available from the Alto-Shaam 
Tech Team Service Department.

3.  Remove all protective plastic film, packaging 

materials, and accessories from the appliance 
before connecting electrical power.  Store any 
accessories in a convenient place for future use.

®

®

Summary of Contents for AR-7H ELECTRONIC CONTROL

































Reviews: