background image

T R A N S P O RTAT I O N   D A M A G E   a n d   C L A I M S

All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments

become the property of the consignee.

Should damage occur in shipment, it is a matter between the carrier and the consignee.  In such cases, the

carrier is assumed to be responsible for the safe delivery of the merchandise, unless negligence can be

established on the part of the shipper.

1. Make an immediate inspection while the equipment is still in the truck or immediately after it is moved to the receiving area.  

Do not wait until after the material is moved to a storage area.

2. Do not sign a delivery receipt or a freight bill until you have made a proper count and inspection of all merchandise received.

3. Note all damage to packages directly on the carrier’s delivery receipt.

4. Make certain the driver signs this receipt.  If he refuses to sign, make a notation of this refusal on the receipt.

5. If the driver refuses to allow inspection, write the following on the delivery receipt:  

Driver refuses to allow inspection of containers for visible damage.

6. Telephone the carrier’s office immediately upon finding damage, and request an inspection.  Mail a written confirmation of the time,

date, and the person called.

7. Save any packages and packing material for further  inspection by the carrier.

8. Promptly file a written claim with the carrier and attach copies of all supporting paperwork.

We will continue our policy of assisting our customers in collecting claims which have been properly filed and actively pursued.  

We cannot, however, file any damage claims for you, assume the responsibility of any claims, or accept deductions in payment 

for such claims.

L I M I T E D   WA R R A N T Y

Alto-Shaam, Inc. warrants to the original purchaser only that any original part that is found to be defective in material or workmanship will, at

Alto-Shaam's option, subject to provisions hereinafter stated, be replaced with a new or rebuilt part.

The parts warranty period is as follows:

For the refrigeration compressor on Alto-Shaam Quickchillers

, five (5) years from the date of installation.

For the heating element on Halo Heat

®

cook/hold ovens, as long as the original purchaser owns the oven.

For all other parts, one (1) year from the date of installation or fifteen (15) months from the shipping date, whichever occurs first.
The labor warranty period is one (1) year from the date of installation or fifteen (15) months from the shipping date, whichever occurs first.  
Alto-Shaam will bear normal labor charges performed during standard business hours, excluding overtime, holiday rates or any 

additional fees.
To be valid, a warranty claim must be asserted during the applicable warranty period.  This warranty is not transferable.

THIS WARRANTY DOES NOT APPLY TO:

1. Calibration.
2. Replacement of light bulbs and/or the replacement of display case glass due to damage of any kind.
3. Equipment damage caused by accident, shipping, improper installation or alteration.
4. Equipment used under conditions of abuse, misuse, carelessness or abnormal conditions, including but not limited to, equipment subjected

to harsh or inappropriate chemicals, including but not limited to, compounds containing chloride or quaternary salts, poor water quality, or

equipment with missing or altered serial numbers.

5. Damage incurred as a direct result of poor water quality, inadequate maintenance of steam generators and/or surfaces affected by water

quality.  Water quality and required maintenance of steam generating equipment is the responsibility of the owner/operator.

6. Damage caused by use of any cleaning agent other than Alto-Shaam's Combitherm

®

Cleaner, including but not limited to damage due to

chlorine or other harmful chemicals.  

Use of Alto-Shaam's Combitherm

®

Cleaner on Combitherm

®

ovens is highly recommended.

7. Any losses or damage resulting from malfunction, including loss of product or consequential or incidental damages of any kind.
8. Equipment modified in any manner from original model, substitution of parts other than factory authorized parts, removal of any parts

including legs, or addition of any parts.

This warranty is exclusive and is in lieu of all other warranties, express or implied, including the implied warranties of merchantability and

fitness for a particular purpose.  In no event shall Alto-Shaam be liable for loss of use, loss of revenue or profit, or loss of product, or for any

indirect, special, incidental, or consequential damages.  No person except an officer of Alto-Shaam, Inc. is authorized to modify this warranty 

or to incur on behalf of Alto-Shaam any other obligation or liability in connection with Alto-Shaam equipment.

Effective 02/09

RECORD THE MODEL AND SERIAL NUMBER OF THE APPLIANCE FOR EASY REFERENCE.  

ALWAYS REFER TO BOTH MODEL AND SERIAL NUMBER IN  ANY CONTACT WITH ALTO-SHAAM REGARDING THIS APPLIANCE.

Model: 

_______________________________________________

Date Installed: 

__________________________________________________________

Voltage: 

______________________________________________ 

Purchased From: _______________________________________________ 

Serial Number: 

_______________________________________  _______________________________________________________________________

W 1 6 4   N 9 2 2 1   W a t e r   S t r e e t  

P. O .   B o x   4 5 0  

M e n o m o n e e   F a l l s ,   W i s c o n s i n   5 3 0 5 2 - 0 4 5 0  

U . S . A .

PHONE:   262.251.3800  • 800.558-8744 

USA

/

CANADA

FAX:   262.251.7067 • 800.329.8744 

U

.

S

.

A

ONLY

www.alto-shaam.com

P R I N T E D I N U

.

S

.

A

.

All manuals and user guides at all-guides.com

Summary of Contents for 1000-UP

















































Reviews: