Page 8
Helios Series
Installation & Users Manual
Product Overview
Components
Helios Series 1x4
Helios Series 2x2
Helios Series 2x4
Surface Mounting Kit
Cable Suspension Kit
Power Requirements
Before performing any field wiring, refer to and read the warnings contained in “Important Information” on page 4.
WARNING! The Back-Lit Panel should be connected to a constant circuit or a relay device. It should never be con-
nected to a dimmer or circuit controlled by a dimmer.
WARNING! The maximum allowable input current is 20 Amps. Do not overload circuits! Luminaires must be sup-
plied by a branch circuit protected by a maximum 20 Amp circuit protector. Doit être alimenté par un circuit de
dérivation protégé par un maximum de 20 ampères circuit protecteur. Ne surchargez pas les circuits!
Power requirements per panel are as follows:
2x2 = 20 watts minimum, 120 - 277VAC
1x4 = 20 watts minimum, 120 - 277VAC
2x4 = 30 watts minimum, 120 - 277VAC
